Xref: utzoo comp.sys.amiga:17445 comp.sys.amiga.tech:210
Path: utzoo!mnetor!uunet!husc6!mailrus!tut.cis.ohio-state.edu!bloom-beacon!oberon!pollux.usc.edu!papa
From: papa@pollux.usc.edu (Marco Papa)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: Re: binddrivers noise with A2090 / MiniScribe
Message-ID: <8267@oberon.USC.EDU>
Date: 10 Apr 88 06:52:50 GMT
References: <3778@killer.UUCP>
Sender: news@oberon.USC.EDU
Reply-To: papa@pollux.usc.edu (Marco Papa)
Organization: Felsina Software, Los Angeles, CA
Lines: 17
Keywords: A2090 Binddrivers MiniScribe noise hard drive

In article <3778@killer.UUCP> jdp@killer.UUCP (Jim Pritchett) writes:
|     Why does my MiniScribe make a buzz saw type noise when my startup-sequence
|does a Binddrivers.  Is this harmful?  Can it be avoided?  (Please dont suggest
|removing the hard drive.)  It sounds like it is stepping from the park zone
|back to the first cylinder.  Any comments,

It is not harmful. It the way it should be.  It will happen with any disk.
It is done with any machine (try to boot an IBM AT with hard drive).

--Marco



-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
uucp:...!pollux!papa       BIX:papa       ARPAnet:pollux!papa@oberon.usc.edu
 "There's Alpha, Beta, Gamma and Diga!" -- Leo Schwab [quoting Rick Unland]
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=