Path: utzoo!utgpu!water!watmath!clyde!bellcore!tness7!petro!swrinde!ut-sally!im4u!husc6!think!ames!lll-lcc!well!ewhac
From: ewhac@well.UUCP (Leo 'Bols Ewhac' Schwab)
Newsgroups: comp.sys.amiga.tech
Subject: Re: High Priority Copper Interrupts - How?
Message-ID: <5613@well.UUCP>
Date: 7 Apr 88 01:06:26 GMT
References: <2760@crash.cts.com>
Reply-To: ewhac@well.UUCP (Leo 'Bols Ewhac' Schwab)
Organization: Very little.
Lines: 20

In article <2760@crash.cts.com> haitex@pnet01.cts.com (Wade Bickel) writes:
>   I've been trying to move my interrupt mechanism from the VBlank chain to
>the High priority Copper pin.  According to my RKM the pin is at bit 14 of the
>INTREQ register, but my hardware manule claims this pin is the master
>enable/disable bit.  What's the story.
>
	You should believe whatever the .h files say.  Checking my copy, I
see the following:

#define	INTF_COPER		(1<<4)

	Incidentally:

#define	INTF_SETCLR		(1<<15)		/*  Not 14  */

_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Leo L. Schwab -- The Guy in The Cape  ihnp4!pacbell -\
 \_ -_		Recumbent Bikes:	      dual ---> !{well,unicom}!ewhac
O----^o	      The Only Way To Fly.	      hplabs / (pronounced "AE-wack")
"Work FOR?  I don't work FOR anybody!  I'm just having fun."  -- The Doctor