Xref: utzoo comp.sys.amiga:17491 comp.sys.amiga.tech:245
Path: utzoo!mnetor!uunet!husc6!uwvax!astroatc!jojo
From: jojo@astroatc.UUCP (Jon Wesener)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: Re: binddrivers noise with A2090 / MiniScribe
Message-ID: <942@astroatc.UUCP>
Date: 11 Apr 88 15:23:48 GMT
References: <3778@killer.UUCP>
Reply-To: jojo@astroatc.UUCP (Jon Wesener)
Organization: Astronautics Technology Cntr, Madison, WI
Lines: 18
Keywords: A2090 Binddrivers MiniScribe noise hard drive

In article <3778@killer.UUCP> jdp@killer.UUCP (Jim Pritchett) writes:
>
>     Why does my MiniScribe make a buzz saw type noise when my startup-sequence
>does a Binddrivers.  Is this harmful?  Can it be avoided?  (Please dont suggest
>removing the hard drive.)  It sounds like it is stepping from the park zone
>back to the first cylinder.  Any comments,

	Whew!  Good question,  And I though it was just me that had this
problem!  I have an st251, the 1st time my amy boots, it makes a few clicks.
But when I reboot after its been on a while; I get the buzz-saw from hell
sound effect and pray my disk isn't being munged.  This is very unnerving.

--j
-- 
jon wesener
... {seismo | harvard | ihnp4} ! {uwvax | cs.wisc.edu} ! astroatc!jojo

"I say, why are those buildings swaying like trees?"