Path: utzoo!mnetor!uunet!husc6!bloom-beacon!tut.cis.ohio-state.edu!mailrus!ames!pasteur!ucbvax!BCIT.BITNET!B3140002
From: B3140002@BCIT.BITNET
Newsgroups: comp.sys.apple
Subject: hooking up Apple modem to IBM serial port
Message-ID: <276*B3140002@BCIT>
Date: 30 Mar 88 23:31:00 GMT
References: <880330072543-0800*>
Sender: usenet@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 29

It should be a standard RS-232 connector cable.   You should be able to get one
from just about any computer/electronics store.

If you are still having problems let me know and I will try and dig up the pin
out diagrams I have for a RS-232 connector.


>...like the title says: I've got this Apple 300/1200 baud modem (the kind that
>fits under the telephone), and I'd love to hook it up to my IBM (std. Turbo 10
)
>so I can run a second modem. What I need to know is if anyone has come across
>either a place that sells the proper cable, or if someoen else has adapted the
>modem to fit the serial port themselves, and can supply the proper pinouts.
>
>
>...he, I got the damn thing in a hardware swap, so I guess I'd better find a
>use for it..
>
>
>
>                            OM

Sean Barry
BITNET   :  <B3140002@BCIT>
NetNorth :  B3140002/BCIT/NetNorh,"",CA    <--- I am not sure that will work
                                                I am fairly new to the network
                                                since BCIT has just recently
                                                allowed it's student's
                                                to use the network.