Path: utzoo!mnetor!uunet!husc6!im4u!ut-sally!ut-emx!rick
From: rick@ut-emx.UUCP (Rick Watson)
Newsgroups: comp.sys.mac.programmer
Subject: LSC and CODE resources
Message-ID: <1569@ut-emx.UUCP>
Date: 4 Apr 88 22:12:42 GMT
Organization: The University of Texas at Austin, Austin, Texas
Lines: 27

1. I'm using LightSpeed C to produce a CODE resource.  I don't want the 
glue that the linker sticks on the front of the resource.  Is there
any way to prevent the glue from getting stuck on in the first place?
I'd rather not have to write a routine to strip it back off.  Or, is there
anyway to get the linker to use my glue instead of theirs?

2. Failing the above, is the source to their glue anywhere?

3. Actually, what I'm doing is converting a SCSI disk driver written in
Megamax C to LSC.  I need the structure of the code to be something like:

JMP INSTALLER
DRIVER HEADER (0X4F00, ETC)
DRIVER CODE
INSTALLER CODE

without any LSC glue at the front.

Any ideas?

Many thanks,
Rick Watson
University of Texas Computation Center
 arpa:   ccaw001@utadnx.cc.utexas.edu
 uucp:   ...seismo!ut-sally!ut-emx!rick
 bitnet: ccaw001@utadnx     span:  utspan::watson
 phone:  512/471-3241