Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!mailrus!tut.cis.ohio-state.edu!bloom-beacon!mit-eddie!bbn!rochester!ritcv!cci632!ccicpg!felix!zemon
From: TENGI@pucc.bitnet (Christopher J Tengi)
Newsgroups: comp.unix.ultrix
Subject: DF03 on DMF-32 in "shared" mode - HELP
Message-ID: <27817@felix.UUCP>
Date: 5 Apr 88 22:15:25 GMT
Sender: zemon@felix.UUCP
Reply-To: TENGI@pucc.bitnet (Christopher J Tengi)
Lines: 23
Approved: zemon@felix.UUCP
Reply-Path:


Greetings Ultrix Wizards!

  I am having a bit of trouble trying to get a DF03 to work correctly on
a DMF-32 port.  The symptoms are this: the system never answers incoming
calls, and never sees carrier on outgoing uucico and tip connections (there
*is* carrier according to the lights on the modem).  The line was set up
using the /etc/uucpsetup command.  The line in question is port 0 on the DMF
and the switches are currently set for modem control.  All of the files
(in /dev, /etc, and /usr/lib/uucp) seem to be in order.  I have rebooted
since I set it up and am still having no luck.  I am convinced that there
is something fairly basic that I'm missing (yes, I did connect the BC22E
cable at both ends :-)).  Can anyone out there give me a hand?  Please
send mail as it doesn't seem to me like a topic worth much netnews bandwidth.

                                    Thanks,
                                       /Chris

BITNET: TENGI at PUCC
INTERNET: TENGI@PUCC.Princeton.EDU
UUCP: don't know yet, maybe someone could tell me!  :-)


[ UUCP:  psuvax1!pucc.bitnet!TENGI  ought to work     -- AZ ]