Xref: utzoo comp.mail.uucp:1275 comp.dcom.modems:1806
Path: utzoo!mnetor!uunet!husc6!bloom-beacon!gatech!udel!princeton!mccc!pjh
From: pjh@mccc.UUCP (Pete Holsberg)
Newsgroups: comp.mail.uucp,comp.dcom.modems
Subject: Re: TELEBIT modems and UUGETTY
Message-ID: <611@mccc.UUCP>
Date: 1 May 88 17:11:13 GMT
References: <342@dsinc.UUCP> <277@mult.UUCP>
Reply-To: pjh@mccc.UUCP (Pete Holsberg)
Organization: The College On The Other Side of Route 1
Lines: 20

In article <277@mult.UUCP> roe@mult.UUCP (R. Peterson) writes:
...The telebit(genius modem that is it) has a mode that sends NO result codes
...on incoming calls, and all result codes on outgoing.  No messing with
...dialler scripts, or other such hackery.
...
...just set:
...ATQ6&W
...  or
...ATQ7&W
...
...depending on whether you want codes sent to the remote.
...(REF: page 4-9 of rev A manual - amazing what reading a manual
...can do)


Of course, there's no substitute for real life experience.  Despite what
it says in the manual, the 'Blazer Plus with 4.00 ROMs will go into a
"deadly getty embrace" even though allof its registers are set to the
values posted by Telebit!  And that includes Q6.  I know, I know: "it
SHOULD work the way it says in the manual"!