Path: utzoo!mnetor!uunet!husc6!bbn!rochester!udel!princeton!siemens!demon!bmh From: bmh@demon.siemens-rtl (Beatrice M Hwong) Newsgroups: comp.protocols.appletalk Subject: Re: problem with NCSA TELNET ? Message-ID: <536@siemens.UUCP> Date: 29 Apr 88 18:42:04 GMT References: <1385*kenw@noah.arc.cdn> Sender: news@siemens.UUCP Reply-To: bmh@demon.UUCP (Beatrice M Hwong) Organization: Siemens Research and Technology Labs, Princeton NJ Lines: 20 In article <1385*kenw@noah.arc.cdn> you write: > > I'm not sure what's wrong with your NCSA TELNET, but it sounds a little >like a problem we're having with ours. > > After some net reconfiguration and playing around with load files (we've >been testing Pacer) we now find that NCSA Telnet 2.1 works on some Macs, and >not on others. Here's the kicker: the Macs on which it works have power >supplies with the +5 volts at 5.0 volts or BELOW. Those with the +5 much above >this point do not work - and that includes most SEs, which tend to be around >5.1. Changing net configurations doesn't seem to have much effect. > We, too, are using Pacer and find it conflicts with NCSA Telnet. The Pacer people say it is a Telnet problem-"not letting a socket go"? For us it is consistent across Telnet 1.12 and 1.2. We've temporarily given up using Telnet. The symptom is that when we attempt to use Telnet, we get "Appletalk listener error". Is that what happens to you? Beatrice Hwong Siemens RTL