Path: utzoo!mnetor!uunet!seismo!sundc!pitstop!sun!amdcad!ames!killer!tness7!petro!swrinde!ut-sally!ut-emx!juniper!bigtex!jclyde!john
From: john@jclyde.UUCP (John B. Meaders Jr.)
Newsgroups: comp.unix.xenix
Subject: Re: Configuring Xenix for 1200/2400 baud access, uucp log management
Message-ID: <673@jclyde.UUCP>
Date: 13 Apr 88 19:50:34 GMT
References: <151@amcad.UUCP>
Reply-To: john@jclyde.UUCP (John B. Meaders Jr.)
Distribution: na
Organization: Capitalist Warmongers, Inc., Austin, TX
Lines: 13

In article <151@amcad.UUCP> billb@amcad.UUCP (Bill Burton) writes:
>Here is the ttys file on the Xenix machine:
>/etc/ttys:
>12tty1A		<- modem port 1
>12tty2A		<- modem port 2
  ^
You need to make sure this 2 in /etc/gettydefs is pointed to the 2400 baud
sequence.  I use 3 on my system here (2400 baud) and then cycle to 1200 and
300 and back to 2400 baud.  Hope this helps.
-- 
John B. Meaders, Jr.  1114 Camino La Costa #3083, Austin, TX  78752
ATT:  Voice:  +1 (512) 451-5038  Data:  +1 (512) 371-0550
UUCP:   ...!uunet!utastro!bigtex!jclyde!john  or  john@jclyde.UUCP