Path: utzoo!attcan!uunet!edsews!rel!bob
From: bob@rel.eds.com (Bob Leffler)
Newsgroups: comp.dcom.lans
Subject: Re: DEMPR problem - DEMPR appears to hang
Summary: dempr's
Message-ID: <1079@rel.eds.com>
Date: 14 May 88 11:31:38 GMT
References: <8661@ames.arc.nasa.gov>
Organization: Electronic Data Systems, Troy, MI
Lines: 18

In article <8661@ames.arc.nasa.gov>, lamaster@ames.arc.nasa.gov (Hugh LaMaster) writes:
> I have a DEMPR which I inherited - DEMPR - AA Rev. C1
> This particular box hangs every now and then and must be powered
> off and on to reset - then it works for a while (MTBF 1 day) and
> then hangs again.  Is this a well known problem (e.g. firmware)
> or is it just my box (call the repair man)?

I run into a similar problem every once in while when all the ports
are not terminated.  Other than that I haven't experienced any major
problems with the dozen demprs located at my site.




-- 
Bob Leffler - EDS, GM Truck & Bus Account (313)456-5375
bob@rel.eds.com or {uunet!edsews, rutgers, umix}!rel!bob
Opinions expressed may not be those of my employer.