Xref: utzoo comp.sys.ibm.pc:15684 comp.protocols.misc:267
Path: utzoo!attcan!uunet!husc6!think!bloom-beacon!tut.cis.ohio-state.edu!mailrus!umix!teemc!mibte!mcf!shan
From: shan@mcf.UUCP (Sharan Kalwani)
Newsgroups: comp.sys.ibm.pc,comp.protocols.misc
Subject: RJE/Bisync link with IBM-pc
Keywords: ibm-pc, rje, ibm protocols
Message-ID: <227@mcf.UUCP>
Date: 17 May 88 12:53:04 GMT
Reply-To: shan@mcf.UUCP (Sharan Kalwani)
Organization: michigan cancer foundation, detroit mi 48201 (313) 833-0710
Lines: 28

Hello Friends!

I have been given the task of creating an RJE linkup between a Contel
Transaction Processing System we have here with an IBM-pc. Unfortunately,
I do not know much about the subject and desire your help out there.

Essentially we need to know how we can do cabling from the pc to the
system (which understands almost all IBM protocols I'm told), what
hardware product we would need to install on the pc side of things,
what software we must insure exists (on both ends). Any suggested vendors,
or experiences of your own that you can share - we will be very happy
to hear from you.

The application is to transfer sets of files/an entire file (anywhere
from 1/2 Meg to 6 Megabytes in size) over to the PC or another system
that is already linked up to the PC.

Many thanks in advance!
Sharan Kalwani
ps: If you can send replies to me, please do so _ I normally don't read
this groups _ If you can't can't that's alright _ I just enabled these
group to make sure I won't miss anything.

-- 
sharan kalwani, vax facility, mcf, 110 east warren avenue, detroit mi 48201
usenet  : ...!{uunet!umix, pur-ee!iuvax, ucbvax!mtxinu, ihnp4!mibte}!mcf!shan
internet: shan%mcf.uucp@umix.cc.umich.edu         	shan@mcf.uucp
dec enet: decwrl::"umix.cc.umich.edu!mcf!shan"	  	fax: (313) 831-8714