Path: utzoo!attcan!uunet!husc6!bbn!oberon!pollux.usc.edu!papa
From: papa@pollux.usc.edu (Marco Papa)
Newsgroups: comp.sys.amiga
Subject: Re: A2090 @-Drive Questions
Message-ID: <9126@oberon.USC.EDU>
Date: 17 May 88 03:52:00 GMT
References: <2581@louie.udel.EDU>
Sender: news@oberon.USC.EDU
Reply-To: papa@pollux.usc.edu (Marco Papa)
Organization: Felsina Software, Los Angeles, CA
Lines: 16

In article <2581@louie.udel.EDU> DPOPE%AUDUCVAX.BITNET@cunyvm.cuny.edu writes:
|I have been using a Seagate 225 ST506 drive connected to the 2090 HD
|controller.  I am presently using a one-connector cable.  I recently
|purchased a second ST506 drive and the two connector cable.  What changes
|do I need to make to have both drives connected?  Thanks.

Quickly. Get a "standard" 2-drive connector.  Look in Computer Shopper for MANY
places where you can get one.  If you get the "twisted type", you'll need to
set BOTH drives a SELECT 1.  If you get a NON-twisted cable, the second drive
must be set with SELECT 2.

-- Marco Papa 'Doc'
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
uucp:...!pollux!papa       BIX:papa       ARPAnet:pollux!papa@oberon.usc.edu
 "There's Alpha, Beta, Gamma and Diga!" -- Leo Schwab [quoting Rick Unland]
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=