Xref: utzoo comp.sys.amiga:18918 comp.sys.amiga.tech:725
Path: utzoo!attcan!uunet!husc6!bloom-beacon!tut.cis.ohio-state.edu!mailrus!ames!necntc!dandelion!ulowell!miner
From: miner@dino.ulowell.edu (Rich Miner)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: Re: LIVE! with a 2000?
Message-ID: <1982@dino.ulowell.edu>
Date: 17 May 88 01:52:06 GMT
References: <333NETOPRHM@NCSUVM>
Reply-To: miner@dino.ulowell.edu (Rich Miner)
Organization: University of Lowell Productivity Center, Lowell MA.
Lines: 13

In article <333NETOPRHM@NCSUVM> NETOPRHM@NCSUVM.BITNET (Hal Meeks) writes:
>I know that LIVE! uses the expansion bus on a 1000. Is there _any_
>way I can use it on a 2000? 

You can use a MicroBotics Starboard-II to A2000 adapter.  The A1000
Live! fits right in the adapter, but the result does not fit right into
the A2000, you have to take a hack-saw to the A2000.   Cut a small
opening in front of the A2000 slot you plan on using and the board fits
right in.  The A2000 cover will still fit on, and hide the hack.  You
need to add a few lines but you should ask A**2 about them.  If they
can't help let me know.
-- 
Rich miner@dino.ulowell.edu   617/452-5000x2693   UL-CPE Imaging Research Lab