Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ames!pasteur!ucbvax!decwrl!hplabs!hpda!hp-sde!hpcea!hpcilzb!daves
From: daves@hpcilzb.HP.COM (Dave Scroggins)
Newsgroups: comp.sys.amiga
Subject: Re: serial vs. parallel, was:(Re: Amiga as workstation)
Message-ID: <2030058@hpcilzb.HP.COM>
Date: 13 May 88 22:06:44 GMT
References: <3896@gryphon.CTS.COM>
Organization: HP Design Tech Center - Santa Clara, CA
Lines: 20

What we need for our Amiga's is an IEEE-488 port.

Most everything I use at work work with this
port.

There are s few things with RS232 at work, but not much.

There's not much af anything with Centronics here.

My plotter needs IEEE-488!!

So -- there is a use for ALL the ports, serial and parallel.

Now maybe I can get some useful info from this discussion.

Does anyone have a way to change Centronics to IEEE-488.

I have a schematic but it seems to be ignoring some signals.

Dave S.