Path: utzoo!utgpu!water!watmath!clyde!att!ihnp4!chinet!saj
From: saj@chinet.UUCP (Stephen Jacobs)
Newsgroups: comp.sys.atari.st
Subject: Re: clocks for the cartridge port
Summary: I use a decent one
Message-ID: <5576@chinet.UUCP>
Date: 13 May 88 00:59:27 GMT
References: <3275@hcr.UUCP> <4340@dasys1.UUCP> <5481@utah-cs.UUCP>
Organization: Chinet - Chicago Public Access UNIX
Lines: 7


In response to Sandra Loosemore's request for experiences with clocks for
the cartridge port: I use a LogiKhron module from Shanner International.
It can be operated with or without a single desk accessory.  It does the
job.  I have not been motivated to remove the screws and see if the 
battery can be replaced.  Of course, a big hard disk with a clock in the
host adaptor is the way to go :-)