Path: utzoo!attcan!uunet!husc6!bloom-beacon!mit-eddie!uw-beaver!tektronix!sequent!mntgfx!gssc!bradd
From: bradd@gssc.UUCP (Brad Davis)
Newsgroups: comp.sys.ibm.pc
Subject: Re: How do you connect a standard RGB monitor to a PS/2
Message-ID: <5703@gssc.UUCP>
Date: 22 May 88 22:14:16 GMT
References: <42555GTI@PSUVM>
Reply-To: bradd@gssc.UUCP (Brad Davis)
Organization: Graphic Software Systems, Beaverton Or
Lines: 24

In article <42555GTI@PSUVM> GTI@PSUVM.BITNET (Leon Geesey Jr) writes:
>Hi all,
>   I was wondering how i could connect a Standard RGB monitor
>to a PS/2? I need not as a perminent thing, but for demonstration
>purposes. I need to be able to connect a PS/2 model 30 to a device
>that has standard RGB input, thaty then shows the image on the screen.
>
>
>                                            Leon

   Can't you just mount an EGA card in one of the slots and set the EGA's
switches for the appropriate monitor (Mono, Color, Enhanced) ?

   IBM offers a VGA card for the model 30, so it doesn't seem likely the
30 has an allergy to EGA-flavored cards.

   Brad Davis

====== ====== ======     US MAIL: 9590 SW Gemini Dr.
==     ==     ==                  Beaverton, OR  97005
==  == ==  == ==  ==     PHONE:   (503) 641-2200
==  ==     ==     ==     UUCP:    uunet!tektronix!sequent!gssc!bradd
====== ====== ======     Disclaimer: I'm a mushroom.
The Graphics Experts     "Practice safe computing. Wear a write-protect tab."