Path: utzoo!attcan!uunet!portal!cup.portal.com!Ilan
From: Ilan@cup.portal.com
Newsgroups: comp.sys.mac
Subject: Re: Need info own getting binaries to my mac
Message-ID: <5388@cup.portal.com>
Date: 13 May 88 06:37:39 GMT
References: <14847@sgi.SGI.COM>
Distribution: na
Organization: The Portal System (TM)
Lines: 14
XPortal-User-Id: 1.1001.2614

Michael,
You do not need any more than a connection between the modem port on
the mac and an RS232 on you other system.

If you have a communications program on both, just bring up the two
programs on each machine.  Then use their XMODEM, YMODEM, KERMIT or
any other protocol they run to SEND from one to the other.

For example, run XMODEM on one machine and place it in "SEND XMODEM"
mode, then run XMODEM on the receiving machine and place it in "RECEIVE
XMODEM" mode.  That will transfer your files from machine A to B.

Good luck..              - Ilan Rabinowitz -  with ILANET(tm)
                         Ilan@cup.portal.com