Path: utzoo!attcan!uunet!portal!cup.portal.com!Jerry_Geronimo_Whitnell
From: Jerry_Geronimo_Whitnell@cup.portal.com
Newsgroups: comp.sys.mac
Subject: Re: stand Mac II vertically?
Message-ID: <5608@cup.portal.com>
Date: 18 May 88 21:09:13 GMT
References: <1856@uhccux.UUCP>
Distribution: na
Organization: The Portal System (TM)
Lines: 21
XPortal-User-Id: 1.1001.3098

|Does anyone have any solid info on whether the Mac II can be mounted
|vertically on the floor?  Thanks...todd

Obviously, you havn't been in my office in California :-).  I have a Mac
II mounted on it's side using the Kensington stand (avilable from
ComputerWare).  All of the cables will reach to the Mac II on the floor
as long as it's not too far away from the monitor and keyboard.  The
monitor cable and power cord are the shortest, but will reach.  I have
an external drive so I needed a SCSI extender cable, but if you have
an internal drive you won't need that.

As someone else mentioned in passing, don't put the Mac II on the floor
without a stand as blocking the air vents on the side will cause
overheating

|-- 
|Todd Ogasawara, U. of Hawaii Faculty Development Program

Jerry Whitnell
jwhitnell@cup.portal.com
...!sun!cup.portal.com!jwhitnell