Xref: utzoo comp.sys.mac:16247 comp.sys.ibm.pc:15736
Path: utzoo!attcan!uunet!lll-winken!lll-tis!ames!ll-xn!mit-eddie!bloom-beacon!gatech!udel!princeton!mccc!pjh
From: pjh@mccc.UUCP (Pete Holsberg)
Newsgroups: comp.sys.mac,comp.sys.ibm.pc
Subject: Re: Mac to PC and back via 3.5"
Keywords: Options board.
Message-ID: <676@mccc.UUCP>
Date: 19 May 88 17:13:15 GMT
References: <4251@sphinx.uchicago.edu> <2169@homxc.UUCP>
Reply-To: pjh@mccc.UUCP (Pete Holsberg)
Organization: The College On The Other Side of Route 1
Lines: 17

In article <2169@homxc.UUCP> rps@homxc.UUCP (R.SHARPLES) writes:
...In article <4251@sphinx.uchicago.edu>, pgil@sphinx.uchicago.edu (paul  gilna) writes:
...> I'm a little fuzzy on this, but I believe there exists
...> a board for the PC which sits between the disk controller
...> and a 3.5" drive allowing a PC to read/write mac floppies.
...> Something like Copy II options board.
...> If I'm on the right track, any info, impressions etc would
...> be greatly appreciated.
...> 
...> cheers,	paul.
...
...Its the COPY II PC Deluxe Option Board by Central Point Software.
...It can be installed in a PC, PC/XT, PC/AT, or 100% compatible (even 
...an AT&T PC6300!) and connected to a 3.5" drive.  

Even a PS/2 25 or 30!  But beware!  My wife ordered one and they sent
her the XT version (the PS/2 requires a special cable, included at
apparently no extra cost).