Path: utzoo!attcan!uunet!husc6!mailrus!umix!nancy!eecae!fmsrl7!mibte!gamma!ulysses!thumper!faline!bellcore!tness7!ninja!sys1!sneaky!trsvax!reyn
From: reyn@trsvax.UUCP
Newsgroups: comp.sys.tandy
Subject: Re: Hard Drives for 1000 TX
Message-ID: <193300062@trsvax>
Date: 16 May 88 15:44:00 GMT
References: <21300002@uxh.cso.uiuc.edu>
Lines: 11
Nf-ID: #R:uxh.cso.uiuc.edu:21300002:trsvax:193300062:000:369
Nf-From: trsvax.UUCP!reyn    May 16 10:44:00 1988


Your only concern in selecting a hard drive for a 1000TX is the length of the
controller card, and that the controller card is designed for the XT rather
than the AT bus.  Other than these considerations, any of the standard hard
drives should work fine.



					  John Reynolds
--- Standard disclaimer
    Tandy Electronics is not responsible for my ramblings, I am.