Path: utzoo!attcan!uunet!portal!cup.portal.com!doug-merritt
From: doug-merritt@cup.portal.com
Newsgroups: sci.electronics
Subject: Re: schem88 proposed standard for posting schematics
Message-ID: <5499@cup.portal.com>
Date: 16 May 88 21:41:36 GMT
References: <26234@cmcl2.NYU.EDU>
Organization: The Portal System (TM)
Lines: 9
XPortal-User-Id: 1.1001.4407

I suggest that you start off each schematic with "schem v88a"
as a keyword to allow such documents to be automatically recognized
as such by software. Note that EDIF does this; each file starts
with "edif version 88989" or some such.
   Doug
---
      Doug Merritt        ucbvax!sun.com!cup.portal.com!doug-merritt
                      or  ucbvax!eris!doug (doug@eris.berkeley.edu)
                      or  ucbvax!unisoft!certes!doug