Xref: utzoo comp.sys.apollo:951 comp.periphs:994
Path: utzoo!attcan!uunet!husc6!bloom-beacon!tut.cis.ohio-state.edu!osu-cis!killer!pollux!ti-csl!tifsil!bill
From: bill@tifsil.UUCP (Bill Petersen)
Newsgroups: comp.sys.apollo,comp.periphs
Subject: Help connecting a Calcomp to an Apollo
Keywords: Calcomp Apollo
Message-ID: <309@tifsil.UUCP>
Date: 25 May 88 20:39:33 GMT
Organization: TI Process Automation Center, Dallas Texas
Lines: 18
Posted: Wed May 25 15:39:33 1988


We would like to connect a Calcomp plotter to an Apollo using a parallel
multi-bus adapter or parallel port on a DSP-90.  Can you give us any me?

I guess I'm not even sure where to start.  Any help would be appreciated.

--
Bill Petersen

Unix Systems & Support     ||  MaBell Net:  214-995-2786                    
Texas Instruments, Inc.    ||  UUCP:        ...!ihnp4!convex!smu!tifsie!bill
P.O. Box 655012, M/S 3635  ||              ...!sun!texsun!ti-csl!tifsie!bill
Dallas, Texas  75265       ||      ...{rutgers,ames}!im4u!ti-csl!tifsie!bill
-- 
Unix Systems & Support     ||  MaBell Net:  214-995-2786                    
Texas Instruments, Inc.    ||  UUCP:        ...!ihnp4!convex!smu!tifsie!bill
P.O. Box 655012, M/S 3635  ||              ...!sun!texsun!ti-csl!tifsie!bill
Dallas, Texas  75265       ||      ...{rutgers,ames}!im4u!ti-csl!tifsie!bill