Path: utzoo!attcan!uunet!cbmvax!gunther From: gunther@cbmvax.UUCP (Ed Gunther QA) Newsgroups: comp.sys.amiga Subject: Re: More storage on a miniscribe 3650 Keywords: 3650 2090 Message-ID: <3890@cbmvax.UUCP> Date: 27 May 88 19:51:21 GMT References: <3189@bsu-cs.UUCP> Reply-To: gunther@cbmvax.UUCP (Ed Gunther QA) Organization: Commodore Technology, West Chester, PA Lines: 50 In article <3189@bsu-cs.UUCP> jbwaters@bsu-cs.UUCP (J. Brian Waters) writes: > The following is an article I found on getting a bit more storage out of > the miniscribe 3650. > > > 1. Whip out NEWZAP and WORK ON A BACKUP of your "Prep" utility that came > with the 2090 controller. > 2. In the String Search gadget type "$032A" (w/o the quotes) this is "810" > 3. Continue Search (L-A+c) you will come to three addresses (at 1C3,1C7,1CB) > 4. Change the 2A in each to a 54....($0354=852) > 5. Click on save. > 6. NEXT BACKUP your HardDisk with any of your favorite utilities > 7. The next step is relative to how you setup your drive... > > IF YOU HAVE NO PARTITIONS, CHANGE THE REFERENCE TO DH0: IN YOUR MOUNTLIST > TO REFLECT THE NEW CYLINDERS... > Why go to all this trouble if you have all the relevent information about the hard drive? Just use the user defined option in prep and enter the information. Please note also: If you are using an A2090 with our hddisk.device, the first partition is automatically mounted. > DH0: Device = hddisk.device > Unit = 1 > Flags = 0 > Surfaces = 6 > BlocksPerTrack = 17 > Reserved = 2 > Interleave = 0 > LowCyl = 2 ; HighCyl = 851 <------THIS IS TO BE CHANGED > Buffers = 100 > BufMemType = 4 > # > > -- > Brian Waters !---\ > ihnp4!{iuvax|pur-ee}!bsu-cs!jbwaters > uunet!---/ -- ------------------------------------------------------------------------------ __ Ed Gunther COMMODORE AMIGA TEST ENGINEERING / /\ "The LAST line of defense. (PERIOD)" < == /__\ UUCP ...{allegra,ihnp4,rutgers}!cbmvax!gunther \__ / \ PHONE 215-431-9356 (life or death only please!) "Disclaimer, heck no! NOooo PROBLEM. You have myyyy word on it."