Path: utzoo!attcan!uunet!lll-winken!lll-tis!helios.ee.lbl.gov!pasteur!ucbvax!decwrl!hplabs!sdcrdcf!trwrb!cadovax!gryphon!pnet02!rstiles
From: rstiles@pnet02.cts.com (Rick Stiles)
Newsgroups: comp.sys.amiga
Subject: Protoboard-II
Message-ID: <4243@gryphon.CTS.COM>
Date: 28 May 88 18:20:19 GMT
Sender: root@gryphon.CTS.COM
Organization: People-Net [pnet02], Redondo Beach, CA.
Lines: 35
Posted: Sat May 28 11:20:19 1988


Well, I just got a protoborad-II in the mail and I thought I would let
you all know about a very good prototype Zorro-II board for the 2000.

Its a two layer board with plated through holes on a 0.1" grid pattern.

The auto-config layout is build in on the board so it should be straight
forward to get the auto-config stuff up and running.

Even with the auto-config layout on the board, there is still place for
119 16 pin DIP IC devices. It also supports PLCC and PGA type sockets.

They also include a adjustable bracket and layout for various DB connectors
and header pins.

It has voltage and ground planes and the edge connector is gold plated.

They also provide a disk with a BASIC and the Fortran Version 1 of a PAL 
assembler and some other utilities.

The price was 49.95.

If you call and ask them, they'll send you a flyer with the layout of the 
board. Their phone # is (409) 833-2686.


Rick.

==============================================================================
The needs of the many outweigh the needs of the few. (Mr. Spock)

So why does Commodore keep sending stuff to Jerry Pournelle.
==============================================================================

UUCP: {ihnp4!scgvaxd!cadovax rutgers!marque}!gryphon!pnet02!rstiles
INET: rstiles@pnet02.cts.com