Path: utzoo!utgpu!water!watmath!clyde!bellcore!rutgers!cbmvax!carolyn
From: carolyn@cbmvax.UUCP (Carolyn Scheppner CATS)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Free Hanging Screens
Message-ID: <3849@cbmvax.UUCP>
Date: 23 May 88 22:02:13 GMT
References: <880519180216.038@Ins.MRC.AdhocNet.CA>
Reply-To: carolyn@cbmvax.UUCP (Carolyn Scheppner CATS)
Organization: Commodore Technology, West Chester, PA
Lines: 18

In article <880519180216.038@Ins.MRC.AdhocNet.CA> svermeulen%Ins.MRC.AdhocNet.CA@UNCAEDU.BITNET (Steve Vermeulen) writes:
>
>      Is there any system supported way of allowing a custom
>      screen that is shorter than the full display height
>      (say a 50 line high screen) to be dragged up from the
>      bottom and NOT obscure the screens below its lower limit?
>      If you take a look at the Photon Paint review picture on
>      page 75 of Amiga Transactor Issue #2 it seems that they
>      might be doing this...

Someone told me that one of the new paint packages - either Photon Paint
or Express paint - uses copper lists to do some of the fancy split screen stuff.
-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Carolyn Scheppner -- CATS   >>Commodore Amiga Technical Support<<
                     UUCP  ...{allegra,ihnp4,rutgers}!cbmvax!carolyn 
                     PHONE 215-431-9180
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=