Path: utzoo!utgpu!water!watmath!clyde!att!ihnp4!ucbvax!MITVMA.MIT.EDU!"John C. Kasperski""JCKASPER at MTUS5"
From: John C. KasperskiJCKASPER@MTUS5@MITVMA.MIT.EDU (Otherwise known as 'Jc', Otherwise known as 'Jc')
Newsgroups: comp.sys.apple
Subject: (none)
Message-ID: <8805261059.aa07794@SMOKE.BRL.ARPA>
Date: 26 May 88 16:04:04 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 53
X-Unparsable-Date: 26 May 88, 01:08:00 EST

Even if John can't get mail to arpa for the moment, no doubt he can
receive <jckasper%mtus5@cunyvm.cuny.edu>
----------------------------Original message----------------------------
Hello...   They just installed a new version of CMS here at MTUS5 and I can't
get anything off Bitnet now... Could you please post the following two little
things that I wrote up.  Thanx in advance.


------------------------------------------------------------------------ 15
Date:         Thu, 26 May 88 00:26:44 EST
From:         "John C. Kasperski   (Otherwise known as 'Jc')" <JCKASPER@MTUS5>
Subject:      Re: Transporters and Hard Disks
To:           Info-Apple@BRL.ARPA
In-Reply-To:  Message of Mon, 23 May 88 11:55:56 MST from
 <hwallace%asbt-te.huachuca-em.arpa@huachuca-em.arpa>


Well... I have a PC Transporter and I should soon have a hard disk..
That is going to be my next investmetn... Don't know when exactly I'm
going to get it though.  Basicly.... its going to be as soon as I get
the money too... :)    It will be beforethe end of the summer though.

Jc
 John C. Kasperski   Info-Apple@BRL.ARPA  5/26/88*Transporters and Hard Disks
------------------------------------------------------------------------ 28
Date:         Thu, 26 May 88 00:30:43 EST
From:         "John C. Kasperski   (Otherwise known as 'Jc')" <JCKASPER@MTUS5>
Subject:      Re:  Transporters and Hard Disks
To:           Info-Apple@BRL.ARPA
In-Reply-To:  Message of Tue, 24 May 88 16:37:18 CDT from <BHUBER@ecla.usc.edu>


Excuse me....  What do you mean you can't use a modem at 2400 baud in IBM mode
with the PC Transporter?.....

If you can't... you better tell my GS and Prometheus promodem 2400g that ...
because they are... or actually have.  Not right now.  I prefer ProTERM over
all of the IBM modem programs.

But I have used Kermit at 2400 baud with the PC Transporter and had no
problems.  Actually the first Kermit I used worked great.. not a single prob.
The second version of Kermit I got, an updated version, would not work at 2400
baud for some reason... The first version works fine though.

Jc

  <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
  <  John C. Kasperski, "Jc"                     Bitnet: JCKASPER @ MTUS5  >
  <                                                                        >
  <                Michigan Technological University                       >
  <                                                                        >
  <  Disclaimer:  The only foolish question, is the one that goes unasked. >
  <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>