Path: utzoo!utgpu!water!watmath!clyde!att!rutgers!rochester!cornell!batcomputer!itsgw!steinmetz!uunet!portal!cup.portal.com!michael_alan_hauser
From: michael_alan_hauser@cup.portal.com
Newsgroups: comp.sys.mac.programmer
Subject: Re: Need SCSI Driver (Summary)
Message-ID: <6049@cup.portal.com>
Date: 29 May 88 19:27:40 GMT
References: <1660@pinney.munsell.UUCP>
Organization: The Portal System (TM)
Lines: 15
XPortal-User-Id: 1.1001.2877

A friend of mine helped me patch the Apple SCSI driver to work with
the Xebec 1410A. It works fine and several friends have been using
this setup for over 18 months. One of them patched SF&I so that it
mounts the drive without going through the dialog interaction. By
setting this as the startup program on a floppy, the hard disk is
automatically mounted at bootup (after the floppy).

Due to incompatabilities between SASI and SCSI, the 1410 controller
cannote be daisy chained with other Mac SCSI devices and must be the
sole SCSI device on the bus.

Michael Hauser
Hummingbird Software
Usenet: sun!cup.portal.com!hummingbird
MacNET: HAUSER