Path: utzoo!utgpu!water!watmath!uunet!labrea!eos!ames!zorch!pacbell!gladys!bakerst!ihtlt!kosman!kevin
From: kevin@kosman.UUCP (Kevin O'Gorman)
Newsgroups: unix-pc.general
Subject: Re: telbit on unixpc
Message-ID: <396@kosman.UUCP>
Date: 24 May 88 07:18:31 GMT
References: <547@n8emr.UUCP> <94@tarkus.UUCP>
Reply-To: kevin@kosman.UUCP (Root)
Organization: K.O.'s Manor - Vital Computer Systems, Oxnard, CA 93035
Lines: 12

In article <94@tarkus.UUCP> jcs@tarkus.UUCP (John C. Sucilla) writes:
>In article <547@n8emr.UUCP> gws@n8emr.UUCP (Gary Sanders (n8emr)) writes:
>>Does anyone have a good set of S register options
>Heres the results from my atn?, mines locked at 19200.
>  [ deleted ]

Fine.  Now, how do you make calls out at the various speeds.  I need 
1200 baud on some outgoing calls, the rest are 'blazers.  My under-
standing is that you are constrained by HDB and vanilla uucp to
talk to the modem at the same baud rate you will talk to the system.

Or did I miss something?