Path: utzoo!attcan!uunet!lll-winken!lll-tis!helios.ee.lbl.gov!pasteur!ucbvax!decwrl!hplabs!hp-pcd!hplsla!hpubvwa!grlab!scott
From: scott@grlab.UUCP (Scott Blachowicz)
Newsgroups: comp.dcom.modems
Subject: SupraModem 2400 problem
Message-ID: <840001@grlab.UUCP>
Date: 8 Jun 88 23:15:36 GMT
Organization: Graphicus
Lines: 17

I have a SupraModem 2400 from Supra Corporation in Albany, OR. It has an
intermittent problem that causes it to drop into command mode after the
"CONNECT xxxx" message shows up. The carrier is still there...I can do
an "ATO" command to reconnect, but this behavior is not very nice for my
uucp dialers to handle. I'm trying to find information from someone on
what could cause the modem to drop into command mode like that. I called
them and the person I talked to said "maybe a chip went, send it back
and we'll replace it". Well, I did that, but he tried it out and it
worked fine for him(surprise, surprise), so he sent it back saying it's
probably a software problem. We're running an HP9000/825 with HP-UX v2.0
which is using HDB UUCP.  If I can find the cause, maybe I can remedy
the problem...

Thanx,
Scott Blachowicz
USPS:  Graphicus                UUCP:    ...!hpubvwa!grlab!scott
       150 Lake Str S, #206     VoicePh: 206/828-4691
       Kirkland, WA 98033       FAX:     206/828-4236