Path: utzoo!attcan!uunet!husc6!uwvax!rutgers!gatech!gitpyr!tynor
From: tynor@pyr.gatech.EDU (Steve Tynor)
Newsgroups: comp.lang.postscript
Subject: Re: Is there an MS-DOS world interactive enviroment for Postscript??
Message-ID: <5926@pyr.gatech.EDU>
Date: 14 Jun 88 13:57:16 GMT
References: <4914@dasys1.UUCP>
Reply-To: tynor@pyr.UUCP (Steve Tynor)
Organization: Georgia Institute of Technology
Lines: 20

In article <4914@dasys1.UUCP> cohen@dasys1.UUCP (David Cohen) writes:
>easier that runs for on a PC? Further, how exactly does one get the 
>interactive mode to work -- we have a laserwriter + printer hooked up to
>the AT and our prelimiary efforts didn't get us anywhere.

That's exactly my setup. I use Procomm (any communications program should
work.)  Once you have the comm port configured (parity, baud, etc.) just
type:
   executive<CR>
(lowercase!) and you'll be talking to the Laserwriter's interpretter.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
No problem is so formidable that you can't just walk away from it.
                     
    Steve Tynor
    Georgia Instutute of Technology

 ...{akgua, allegra, amd, harpo, hplabs,
     ihnp4, masscomp, ut-ngp, rlgvax, sb1,
     uf-cgrl, unmvax, ut-sally}  !gatech!gitpyr!tynor