Path: utzoo!attcan!uunet!lll-winken!lll-tis!helios.ee.lbl.gov!pasteur!ucbvax!pnet01.cts.COM!mwilson
From: mwilson@pnet01.cts.COM (Marc Wilson)
Newsgroups: comp.os.cpm
Subject: Re: INFO-CPM Digest V88 #145
Message-ID: <8806100816.AA09052@crash.cts.com>
Date: 10 Jun 88 08:13:32 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: pnet01!mwilson@nosc.mil
Organization: The Internet
Lines: 22

Richard:

     Z33 can be *easily* installed into the package you already have.  If you
have a Z3BASE.LIB file for the configuration you're running, all you have to
do is assemble ZCPR33.Z80 with that as input.  Then slam the resulting .HEX
file into your system image.

     If you don't have Z3BASE.LIB, it gets a little more complicated.  Use
Z3LOC to build Z3BASE.LIB.  You should have a copy of your configuration
floating around, anyway.


     About two years ago, I did a manual install for ZCPR3 for my Ampro
LB/Z80.  When I got Z33, all I did was re-assemble.  It *is* a drop-in
replacement.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Marc Wilson
     ARPA: ...!crash!mwilson@nosc.mil
           ...!crash!pnet01!pro-sol!mwilson@nosc.mil
     UUCP: [ cbosgd | hp-sdd!hplabs | sdcsvax | nosc ]!crash!mwilson
     INET: mwilson@crash.CTS.COM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~