Path: utzoo!attcan!uunet!lll-winken!lll-tis!ames!mailrus!nrl-cmf!ukma!psuvm.bitnet!tuccvm!ncsuvm.bitnet!netoprhm
From: NETOPRHM@NCSUVM.BITNET (Hal Meeks)
Newsgroups: comp.sys.amiga
Subject: Re: NEC P2200 (was: Re: EPSON LQ-500 REVIEW)
Message-ID: <381NETOPRHM@NCSUVM>
Date: 10 Jun 88 16:06:13 GMT
References: <8806052121.AA27202@cory.Berkeley.EDU> <198@hor-res.UUCP> <9591@g.ms.uky.edu> <6359@cup.portal.com>
Organization: North Carolina State University - Computing Center
Lines: 12

I have a NEC P2200 also, I have to agree with the comments concerning
text output. It is true what has been asserted concerning graphic
output. I am using Preferences 1.3 (robbed off of my ProWrite disk),
and when I set Density to "7" on screen 2 of the graphic select,
contrast is bad. Everything comes out too dark, and details are lost.
This is even with Density set at "1" on screen 1.  If I set screen 2
settings at a lower number (4), things look better, but at a lower
resolution. I am using the ELQ driver supplied, which may be part of
my problem. Anyone have a real NEC P2200 driver?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Hal Meeks
 netoprhm@ncsuvm.bitnet          "I'm doomed! Doomed to live!"
 hgm@ncsuvx.ncsu.edu             --Gomez Addams