Path: utzoo!attcan!uunet!lll-winken!lll-tis!helios.ee.lbl.gov!pasteur!ucbvax!decwrl!labrea!rutgers!mtunx!att!ihnp4!islenet!richard
From: richard@islenet.UUCP (Richard Foulk)
Newsgroups: comp.sys.att
Subject: Re: 3 1/2" on the 7300
Message-ID: <4063@islenet.UUCP>
Date: 9 Jun 88 02:08:48 GMT
References: <213@toylnd.UUCP> <9595@g.ms.uky.edu>
Reply-To: richard@islenet.UUCP (Richard Foulk)
Distribution: na
Organization: Islenet Inc.,  Honolulu
Lines: 17

} I've got something a little different planned.  I have a case & power
} supply for 2 half-height disks.  I also have a 3.5" disk kit from 
} tigertronics for making it look like a 5 1/4" drive.  I'm planning
} on putting both drives into that case, run a cable from inside the
} machine to the drives, and put in a toggle switch of some sort for the
} power only.  When I need to use the 5 1/4 I power it up, otherwise
} I power the 3 1/2.
} 
} How does that sound?

Sounds like a good idea.

You might want to toggle the drive select line along with the power.
All the other lines should buss together okay.

-- 
Richard Foulk		...{vortex,ihnp4}!islenet!richard
Honolulu, Hawaii