Path: utzoo!attcan!uunet!lll-winken!lll-tis!ames!pasteur!ucbvax!ucdavis!deneb.ucdavis.edu!g556871349ea
From: g556871349ea@deneb.ucdavis.edu (0040;0000004731;0;745;352;)
Newsgroups: comp.sys.mac
Subject: Re: HP Emulation on the NTX?
Keywords: HP
Message-ID: <2230@ucdavis.ucdavis.edu>
Date: 10 Jun 88 00:48:42 GMT
References: <11860@mimsy.UUCP>
Sender: uucp@ucdavis.ucdavis.edu
Reply-To: g556871349ea@deneb.ucdavis.edu.UUCP (Colin Ong)
Distribution: na
Organization: University of California, Davis
Lines: 12

In article <11860@mimsy.UUCP> preuss@mimsy.UUCP (Don Preuss) writes:
>We just got an NTX in, The big question is ---- Is there are way to
>switch into HP emulation mode from Postscript? I know how to switch into
From reading the LWII NT/NTX manual, it appears to me that the HPLJ+ can only
connected through the RS-232 port and since only one of the LW ports can be
used at a time, (as in our case) the AppleTalk network would have to be
disconnected. I have not done this procedure before and it is just an
observation.

/Colin Ong     Department of Land, Air and Water Resources
/              University of California, Davis, CA   95616
/              g556871349ea@deneb.ucdavis.edu
/Disclaimer: The university of ca wants no part of my opinionp