Path: utzoo!attcan!uunet!lll-winken!lll-tis!ames!pasteur!ucbvax!hplabs!sdcrdcf!ism780c!tim
From: tim@ism780c.isc.com (T.W."Tim" Smith, Knowledgian)
Newsgroups: comp.sys.mac.programmer
Subject: plate of shrimp ( was: "Re: Lap mgr bugs in MPW C 2.02" )
Message-ID: <10678@ism780c.isc.com>
Date: 13 Jun 88 18:59:29 GMT
References: <405@draken.nada.kth.se>
Reply-To: tim@ism780c.UUCP (T.W."Tim" Smith, Knowledgian)
Organization: Suction and Pressure Lab, California Institute of Lawsonomy
Lines: 20

In article <405@draken.nada.kth.se> ragge@nada.kth.se (Ragnar Sundblad) writes:
< I just discovered a (or two) bug(s) in the Interface libraries
< in MPW 2.0;
< 
< SIntInstall and SIntRemove glue code takes the arguments in the wrong
< order. They are correctly defined in the "Slots.h" file.

This is very strange.  I was using SIntInstall this last weekend.  It was
failing.  I set TMON to trap on _SIntInstall, and found that it appeared
to have garbage in the registers.  So I single stepped through the glue
code, and found that it takes the arguments in the wrong order.

Now for the strange part:  I was using LightspeedC, not MPW!
I was using 2.11, with a copy of SlotMgr.h from god only knows
where.  I haven't yet tried it with 2.13 and the 2.15 libraries
( mainly because it just occured to me that that might make a
difference ).
-- 
Tim Smith				tim@ism780c.isc.com
"I don't practice what I preach because I'm not the
                       kind of person I'm preaching to" -- J.R. "Bob" Dobbs