Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ames!pasteur!ucbvax!decwrl!decvax!tektronix!reed!nscpdc!joer
From: joer@nscpdc.NSC.COM (Joe Rawlings    )
Newsgroups: comp.sys.nsc.32k
Subject: Re: System V.2 TTY device driver?
Keywords: V.2 device driver
Message-ID: <1207@nscpdc.NSC.COM>
Date: 7 Jun 88 17:04:10 GMT
References: <459@daver.UUCP> <470@daver.UUCP>
Reply-To: joer@nscpdc.UUCP (Joe Rawlings    )
Organization: NSC Portland Development Center
Lines: 32

In article <470@daver.UUCP> daver@daver.UUCP (Dave Rand) writes:
>In article <459@daver.UUCP> daver@daver.UUCP (Dave Rand) writes:
>>I have been trying to repair the current device driver for the 
>>ICM-3216, but just cannot seem to get the last bugs out of it.  
>>(The obvious ones were T_BLOCK and T_UNBLOCK not working!) 
>>
>I now have the ICM-3216 V.2 signetics driver working. If there are others
>using this product, and want the improved driver, please send me mail.
>
>The modifications will allow 9600-19.2K bps input, with no loss of data,
>on three channels (at least - I use the fourth as the console).
>
>
>{hoptoad, pyramid, nsc, vsi1}!daver!daver

We at the Portland Development Center are interested in seeing all
bugs in the tty drivers fixed.   A listing of the bugs found and
a copy of the "improved" driver would be helpful.

We cannot fix bugs that no one tells us about.  You should also tell us
which release of the O/S you are using.  We have already fixed several 
tty driver bugs in later releases of the O/S and would like to know if 
you have found new bugs.

Thanks,

JR

-- 
******************************************************************************* *  Joe Rawlings                         nsc!nscpdc!joer                       * 
*  ICM Product Support                  1-800-222-2433 (outside Oregon)       * 
*  Portland Development Center          (503)-629-4414 (Oregon/World)         * *******************************************************************************