Path: utzoo!utgpu!water!watmath!clyde!att!pacbell!ames!umd5!uflorida!usfvax2!jc3b21!fgd3
From: fgd3@jc3b21.UUCP (Fabbian G. Dufoe)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Suggestion for 1.4
Message-ID: <416@jc3b21.UUCP>
Date: 16 Jun 88 15:41:58 GMT
References: <56624@sun.uucp>
Organization: St. Petersburg Jr. College, FL
Lines: 20

In article <56624@sun.uucp>, cmcmanis%pepper@Sun.COM (Chuck McManis) makes
several suggestions for streamlining the boot process:
>   o Make your boot floppy special...
>   o If you are using ARP compress your assigns... 
>   o If you have a hard disk do the minimum stuff on the floppy...
>   o If you are using a shell that allows resident commands... use them 

     Another real simple trick is to change your Startup-Sequence file so
it first copies frequently used commands to ram:, then executes the
commands from ram:.  For example:
     copy assign ram:
     ram:assign c: MyDisk:c
     ram:assign l: Mydisk:l

--Fabbian Dufoe
  350 Ling-A-Mor Terrace South
  St. Petersburg, Florida  33705
  813-823-2350

UUCP: ...gatech!codas!usfvax2!jc3b21!fgd3