Path: utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!bloom-beacon!oberon!pollux.usc.edu!papa
From: papa@pollux.usc.edu (Marco Papa)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Keymap description files
Message-ID: <9763@oberon.USC.EDU>
Date: 12 Jun 88 19:10:13 GMT
References: <25646@bbn.COM> <594@osupyr.mast.ohio-state.edu>
Sender: news@oberon.USC.EDU
Reply-To: papa@pollux.usc.edu (Marco Papa)
Organization: Felsina Software, Los Angeles, CA
Lines: 28

In article <594@osupyr.mast.ohio-state.edu| vkr@osupyr.mast.ohio-state.edu (Vidhyanath K. Rao) writes:
|The 500 and the 2000 have a few extra keys in the numeric keypad. The way
|to include them in the keymap seems not to be easily available. (May be
|they are in the 500/2000 tech. manual, but I don't have that.) The above
|must be related to this. 

Not so. They are easily available as keycodes 5A through 5E as follows:

(	5A
)	5B
/	5C
*	5D
+	5E

|I got interested in this because I want the keymap but with the extra
|keys recognised (for mg). I would like anyhelp you can give.

IF you have the A500/A2000 Workbench disk it should have a keymap named usa1.

Setmap usa1

should do the trick.

-- Marco Papa 'Doc'
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
uucp:...!pollux!papa       BIX:papa       ARPAnet:pollux!papa@oberon.usc.edu
 "There's Alpha, Beta, Gamma and Diga!" -- Leo Schwab [quoting Rick Unland]
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=