Xref: utzoo comp.sys.att:3519 misc.wanted:2460
Path: utzoo!attcan!uunet!lll-winken!lll-tis!helios.ee.lbl.gov!nosc!ucsd!sdcc6!ir121
From: ir121@sdcc6.ucsd.EDU (Richard T Carson)
Newsgroups: comp.sys.att,misc.wanted
Subject: Using an Epson LX800 as  a line printer and for nroff
Message-ID: <3737@sdcc6.ucsd.EDU>
Date: 17 Jun 88 23:12:26 GMT
Reply-To: ir121@sdcc6.ucsd.edu (Richard T Carson)
Distribution: na
Organization: University of California, San Diego
Lines: 19

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
I'm sending this from a friend's account.  Please reply to
keynes!shankar@ucsd.edu or shankar@are.berkeley.edu
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Recently, I got an Epson LX800 dot-matrix printer for using with a
3b2/300.  I hooked it up with a centronics cable to the parallel
port on the 3b2/300.  I can't get lp to work.  cat file > /dev/tty14
(the tty for the parallel port) doesn't work.  stty -a < /dev/tty14
gives a 'cannot open' message.  
Any idea what's wrong and what I should do next?  Not much use
asking  AT & T.  They want $125 an hour just to talk to you on the
phone.  I'd like to use the printer for nroff.  Some time ago,
comp.sources.unix had something on using the mx-80, the precursor
of the lx800, for nroff.  Hope this'll work and that it doesn't need
the printer to be configured for a serial port. 
Any help will be greatly appreciated.
thanks
shankar subramanian  (keynes!shankar@ucsd.edu,
shankar@are.berkeley.edu)