Xref: utzoo comp.graphics:2668 comp.sys.ibm.pc:16436
Path: utzoo!attcan!uunet!lll-winken!lll-tis!ames!mailrus!tut.cis.ohio-state.edu!husc6!spdcc!ima!johnl
From: johnl@ima.ISC.COM (John R. Levine)
Newsgroups: comp.graphics,comp.sys.ibm.pc
Subject: Re: VGA from C
Message-ID: <1111@ima.ISC.COM>
Date: 16 Jun 88 13:47:30 GMT
References: <1332@cooper.cooper.EDU} <732@naucse.UUCP} <10978@agate.BERKELEY.EDU>
Reply-To: johnl@ima.UUCP (John R. Levine)
Organization: Not much
Lines: 11

In article <10978@agate.BERKELEY.EDU> leo@thoth22.berkeley.edu (Leo Pereira) writes:
>}From article <1332@cooper.cooper.EDU}, by craig@cooper.cooper.EDU (Craig Steinberger):
>}} Does anyone know how to access the VGA board on a IBM Model 80 from C?
>Is this at all possible from Microsoft C?  Does MSC have any 
>graphic routines?

Yes, it has a fairly complete set of graphics routines, with scaling, lines,
arcs, and the usual stuff.  Consult the manual for details.
-- 
John R. Levine, IECC, PO Box 349, Cambridge MA 02238-0349, +1 617 492 3869
{ ihnp4 | decvax | cbosgd | harvard | yale }!ima!johnl, Levine@YALE.something
Rome fell, Babylon fell, Scarsdale will have its turn.  -G. B. Shaw