Path: utzoo!attcan!uunet!husc6!uwvax!rutgers!gatech!ncar!ames!ll-xn!oberon!sdcrdcf!csun!polyslo!dorourke
From: dorourke@polyslo.UUCP (David O'Rourke)
Newsgroups: comp.sys.mac
Subject: Re: SCSI for 512KE
Message-ID: <3217@polyslo.UUCP>
Date: 18 Jun 88 21:53:53 GMT
References: <3ca8b9af.12160@espol> <6550@cup.portal.com>
Reply-To: dorourke@polyslo.UUCP (David O'Rourke)
Distribution: na
Organization: Cal Poly State University -- San Luis Obispo
Lines: 15

bill@procase.UUCP (Bill Arnett) writes:
>                             I had some trouble installing the
>Dove 2M board and had to push very hard to get it to seat properly.  I doubt

  Make sure you allow the Mother Board to cool down for a good period of time.
I got my upgrade, turned off my computer, and threw that sucker in there. I
also had problems getting it to seat, I had to push REAL hard to get it to
clamp on.  Well I installed another one the next week on a cool mother board
and it snapped on with just about the right amount of pressure.  I think the
chips on the MB expand just enough to make it difficult if you don't allow
them to cool down first.
-- 
David M. O'Rourke

Disclaimer: I don't represent the school.  All opinions are mine!