Path: utzoo!attcan!uunet!husc6!bloom-beacon!bu-cs!purdue!decwrl!hplabs!hp-sdd!ucsdhub!sdcsvax!ucsd!ucbvax!CORNELLC.CCS.CORNELL.EDU!BMURPHY%BNR.CA
From: BMURPHY%BNR.CA@CORNELLC.CCS.CORNELL.EDU (Bernie Murphy, B.J.)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: re:ps/2 tcp/ip problems
Message-ID: <8807020051.aa00790@Louie.UDEL.EDU>
Date: 2 Jul 88 02:23:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 16


I have had a lot of experience (and problems) getting TELNET to work
properly into a VM TCP/IP environment.  Your best bet is to get a
TN3270 emulator instead of a VT100 emulator when using the IBM.  FTP
System's TN3270 works very well with the Fibronics KNET software.
It is REALLY FAST and of course running in block mode does not generate
all those 64 byte packets containing 1 byte of user data when your
typing in input mode.  You will also experience problems in the VT100
emulator when you 'hyperwrap the cursor' and when you are in insert
mode and the LAN is fairly heavily loaded.

Regards,
Bernie Murphy
Bell-Northern Research

E-mail: BMURPHY@BNR.CA