Path: utzoo!attcan!uunet!husc6!bloom-beacon!bu-cs!dartvax!eleazar.dartmouth.edu!finn
From: finn@eleazar.dartmouth.edu (Andy Behrens)
Newsgroups: comp.dcom.lans
Subject: Ethernet bridges above 56Kb
Message-ID: <9392@dartvax.Dartmouth.EDU>
Date: 20 Jul 88 18:38:38 GMT
Sender: news@dartvax.Dartmouth.EDU
Reply-To: andyb@burcoat.uucp (Andy Behrens)
Organization: Burlington Coat Factory Warehouse
Lines: 15

We will soon have a T1 circuit between two of our sites, but expect to
be using less than half of its bandwidth.  We would like to bridge
together two Ethernet networks at these sites.

All the bridges that I have seen either use an entire T1 circuit, or
use only 56Kb of it.  Does anyone know of one which can be configured
for data rates between these limits?

					Andy Behrens
					andyb@burcoat.uucp

{astrovax,linus,harvard,decvax}!dartvax!burcoat!andyb
andyb%burcoat@dartmouth.EDU
andyb%burcoat@dartcms1.BITNET
(603) 448-5000