Xref: utzoo comp.dcom.modems:2121 comp.unix.xenix:2758
Path: utzoo!attcan!uunet!intek01!mark
From: mark@intek01.UUCP (Mark McWiggins)
Newsgroups: comp.dcom.modems,comp.unix.xenix
Subject: Re: Xenix/386 and Telebit Trailblazers.
Summary: It just takes a long time to connect; try \d's.
Keywords: Xenix Telebit
Message-ID: <324@intek01.UUCP>
Date: 21 Jul 88 16:49:05 GMT
References: <155@nanovx.UUCP>
Reply-To: mark@intek01.UUCP (Mark McWiggins)
Organization: Intek, Inc., Bellevue WA
Lines: 18

I'm running Xenix 286 with the Telebit.  The problem is that it seems to
take Telebits several seconds to establish the high-speed connection and
then it's perhaps several seconds more to get an OK if I'm dialing into
a busy system.  These together are way too long for the default timeout 
setting of uucico.

However, this can be overcome by judicious placing of \d delay markers in 
the L.sys command line, such as:

	uunet Any ACU 19200 x-xxx-xxx-xxxxU ogin: xxxxxxx\d\d\d\d\d ssword: xxx

Try debugging with uucico -x4 if you need to see exactly what's happening.

-- 

Mark McWiggins			UUCP:		uunet!intek01!mark
DISCLAIMER: I could be wrong.	INTERNET:	intek01!mark@uunet.uu.net
						(206) 455-9935