Path: utzoo!attcan!uunet!husc6!bloom-beacon!mit-eddie!uw-beaver!tektronix!orca!tekecs!frip!andrew
From: andrew@frip.gwd.tek.com (Andrew Klossner)
Newsgroups: comp.os.cpm
Subject: Re: Kaypro and Spinwriter 7710
Message-ID: <10185@tekecs.TEK.COM>
Date: 20 Jul 88 14:52:34 GMT
References: <12412216898.11.D-ROGERS@EDWARDS-2060.ARPA> <8246@ncoast.UUCP>
Sender: andrew@tekecs.TEK.COM
Organization: Tektronix, Wilsonville, Oregon
Lines: 15

[]

	"The 7710 uses hardware handshaking, if I remember correctly."

The 7710 will do just about anything ... it will do hardware handshake,
XON/XOFF, or ETX/ACK.  This is all selected by dip switches.  But the
pinouts are nonstandard, so if you want hardware handshake you'll have
to make a special cable.

I've had a 7710 for six years, hooked to my TRS-80 model II running P&T
CP/M.  (I never dreamed this system would keep working for so long!)  I
use hardware handshake at 1200 baud.

  -=- Andrew Klossner   (decvax!tektronix!tekecs!andrew)       [UUCP]
                        (andrew%tekecs.tek.com@relay.cs.net)   [ARPA]