Path: utzoo!attcan!uunet!munnari!stcns3!mikb
From: mikb@stcns3.stc.oz (Mike Benson)
Newsgroups: comp.sys.amiga
Subject: Re: FastMemFirst (was Re: 2090 HDdisk.device)
Message-ID: <624@stcns3.stc.oz>
Date: 18 Jul 88 07:40:34 GMT
References: <8806280524.AA12822@jade.berkeley.edu> <2320@antique.UUCP> <268@jackson.UUCP> <124@dms3b1.UUCP>
Reply-To: mikb@stcns3.stc.oz (Mike Benson)
Organization: Alcatel-STC Australia, North Sydney, AUSTRALIA
Lines: 28

In article <124@dms3b1.UUCP> dave@dms3b1.UUCP (Dave Hanna) writes:
>In article <268@jackson.UUCP>, egranthm@jackson.UUCP (Ewan Grantham) writes:
>> I have seen this suggestion to turn on FastMemFirst in two places today,
>> but can't find such a utility anywhere on my 1.2 disks. 
>
>FastMemFirst is in the System drawer on the _A2000/A500_ version
>of the 1.2 Workbench disk.  It is not on the 1.2 Disk supplied
>with the Enhancer package.

Pardon?  I just looked at my Workbench disk (C= P/N 380724-07) that came with
my (very early - 512K motherboard) A2000.  The only tool that refers to
fastmem is "NoFastMem".  Anyone possessed of wisdom on this issue care to
comment?

>
>> Ewan Grantham    (601) 354-6454 ext.358 
>
>
>-- 
>Dave Hanna,  Daltech MicroSystems

	   Any clod can have the facts, but having opinions is an art.
+----------------------------------+------------------------------------------+
| Mike Benson                      | ACS:  mikb@stcns3.stc.OZ.AU	      |
| Alcatel-STC Pty Ltd              | ARPA: mikb%stcns3.stc.OZ.AU@uunet.UU.NET |
| 11th Floor, 5 Blue St            | UUCP: {enea,hplabs,mcvax,uunet,ukc}!\    |
| North Sydney NSW 2060 AUSTRALIA  |        munnari!stcns3.stc.OZ.AU!mikb     |
+----------------------------------+------------------------------------------+