Path: utzoo!attcan!uunet!husc6!think!bloom-beacon!mit-eddie!killer!gtmvax!dms3b1!dave
From: dave@dms3b1.UUCP (Dave Hanna)
Newsgroups: comp.sys.amiga
Subject: Re: Laser_Printers
Summary: Does it require C-Ltd controller?
Keywords: laser printers C-Ltd
Message-ID: <131@dms3b1.UUCP>
Date: 27 Jul 88 19:39:58 GMT
References: <23@amie.uucp> <280@nfsun.UUCP>
Reply-To: dave@dms3b1.UUCP (Dave Hanna)
Distribution: na
Organization: Daltech MicroSystems, Dallas
Lines: 25

In article <280@nfsun.UUCP> kgeisel@nfsun.UUCP (kurt geisel) writes:
>C-Ltd. has announced a 300 DPI Amiga Laser Printer.  It is SCSI-based and will
   [ ... ]
>driver for it.  However, it is expensive, and you will need an SCSI card.
                                                             ^^^^^^^^^^^^
Does that have to be C-Ltd's controller card?

On the same subject, now that the Amiga Hard Drive market is starting to 
mature a little, what is the general concensus on the C-Ltd SCSI controller
as compared to others available?  They seem to be more or less the first,
or at least the first of those that are still around and well-known.  I
think I'll probably be getting a drive soon, and if their card is going
to be required for this printer, then I may as well get theirs.  But I
do want to make sure their haven't been a rash of negative experiences
with it.  (BTW, this will be for an A2000).
>

>| Kurt Geisel, Intelligent Technology Group, Inc.                          |


-- 
Dave Hanna,  Daltech MicroSystems    |  "Do or do not -- There is no try"
P.O. Box 584, Bedford, TX 76095      |                        - Yoda
(214) 358-4534   (817) 540-1524      |
UUCP:  ...!killer!gtmvax!dave        |