Xref: utzoo comp.sys.amiga:21092 comp.sys.amiga.tech:1264
Path: utzoo!utgpu!water!watmath!watcgl!grwalter
From: grwalter@watcgl.waterloo.edu (Fred Walter)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: using the interface between an Amiga 2000 and bridgecard
Message-ID: <5217@watcgl.waterloo.edu>
Date: 17 Jul 88 18:08:31 GMT
Distribution: comp
Organization: U of Waterloo, Ontario
Lines: 28

Where can I find information on using the interface between an Amiga 2000
and the bridgecard ?

I am interested in writing a driver that would allow the Amiga's mouse to
be used as a mouse on the bridgecard side, as well as writing something
that would allow the bridgecard to get current date/time from the Amiga
side (it seems kinda silly to have TWO battery backed up clock/calenders
inside one box).

I seem to recall someone else mentioning wanting to use the mouse on the
bridgecard side. Did something ever get done along the above lines ?

On a non-related topic, will the fast-file-system work on an Amiga
partition of a hard disk setup on the bridgecard side ?

Also, in the Introduction to the Amiga 2000 manual it mentions a jumper
J301 which is used to enable/disable (or something like that) a second
internal drive. Where is this jumper found on a Rev 4.3 B2000 ? 

	thanx,
	fred

grwalter@watcgl.uwaterloo.ca                  (Canadian domain)
grwalter@watcgl.waterloo.edu                  (US Internet, including CSNET)
grwalter@watcgl.waterloo.cdn                  (CDNnet and some European nets)
watmath!watcgl!grwalter                       (UUCP)
uunet!watmath!watcgl!grwalter                 (another UUCP alternative)
grwalter%watcgl.waterloo.edu@csnet-relay.arpa (ARPA)