Path: utzoo!attcan!uunet!lll-winken!lll-lcc!ames!ll-xn!oberon!pollux.usc.edu!papa
From: papa@pollux.usc.edu (Marco Papa)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Learning to program the serial port
Message-ID: <10855@oberon.USC.EDU>
Date: 19 Jul 88 00:07:06 GMT
References: <4001@jackson.UUCP>
Sender: news@oberon.USC.EDU
Reply-To: papa@pollux.usc.edu (Marco Papa)
Organization: Felsina Software, Los Angeles, CA
Lines: 17

In article <4001@jackson.UUCP> egranthm@jackson.uucp (Ewan Grantham) writes:
|Was wondering what books people might recommend for learning to program
|the Amiga's serial port in C?
|I can find all the info I'd EVER want to know about how to program screens
|and graphics, but barely a word about the serial port.

My e-mail message got rejected so I'm posting here.  Pick the RKM manual
from Addison-Wesley that covers the serial port and the sources for VT100.
If you are adventurous, also pick up the autodocs disk from CATS that
includes info on the latest additions (mark and space parity, etc..).

That will get you started.

-- Marco Papa 'Doc'
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
uucp:...!pollux!papa       BIX:papa       ARPAnet:pollux!papa@oberon.usc.edu
 "There's Alpha, Beta, Gamma and Diga!" -- Leo Schwab [quoting Rick Unland]
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=