Path: utzoo!attcan!uunet!husc6!bloom-beacon!gatech!mandrill!hal!ncoast!gregr
From: gregr@ncoast.UUCP (Gregory Roberts)
Newsgroups: comp.sys.amiga.tech
Subject: SetDrPt()?
Keywords: is there such an animal?
Message-ID: <11950@ncoast.UUCP>
Date: 25 Jul 88 16:53:26 GMT
Reply-To: gregr@ncoast.UUCP (Gregory Roberts)
Organization: Cleveland Public Access UN*X, Cleveland, Oh
Lines: 26


   I was poking about today with a little program to do a *large* raster,
and I wanted to draw something in it real quick to make sure everything was
okey-dokey.  I happened across this routine (SetDrPt) in the RKM manual, so
I thought I'd spice things up a bit.  (it's s'posed to make patterened
lines)
 
   Turns out, the system knows nothing about this routine.  In fact, the
only place I can find it is on page 38 of the '86 RKM.   It's not listed in
Appendix A (where all the fun routines are listed).

    It's not real important that I have this routine, but it's made me
curious.  Is there such a routine?  If so, what's it's name, and how do I
use it.   I also noticed no mention of it in the enhancer update, so I'm
wondering. 

    Sorry if this has been asked before, and if you don't think the answer
is of general interest, just e-mail me.  (Hope the feed system don't go
down again!  :-)

    Thanks....

-- 
**  Gregory Roberts II       ...!uunet!marque!ncoast!gregr
     : 
    ** My fingers are responsible, not me! **